| Proceed to Checkout? |
 |
|
|
|
 |
 Custom Outboard Motor Hoods |
|
Our
outboard motor hoods protect motor cowlings from the
elements. These exact fit hoods are made for your specific
engine model. Prices vary depending on motor size. |
|
|
|
Cloudburst Fabric
Motor Hoods ($27.95 to $66.95) |
|
|
|
Outdrive
Socks |
|
Our outdrive sock is a dual
purpose cover that not only protects your outdrive from the
elements, but deters theft of your expensive prop as well.
One size fits most. |
|
|
|
Boat Cover
Drainage Support Pole |
|
|
Our
drainage support pole utilizes a two piece collar that is
easily installed at the cover location needing elevation and
support. Once in place, you simply put your cover on your
boat and slide the anodized aluminum tube down through the
collar. the attached cord on the collar allows you to
draw the cover up to the desired height.
Depending on the size and style of boat, one or more poles
may be required.
|
|
|
The Cincher |
|
|
Accommodates
our custom fit boat cover draw ropes as well as thousands of
other tie down needs. The cincher is the answer to a
knot free, quick and easy way to draw your boat cover’s rope
as tight as possible, yet with a flick of the thumb lever,
the rope is totally released. Use the Cincher for securing
anything with a 1/4“ rope or cord - boxes, crates, tarps,
tent lines, cargo, bikes, motorcycles, etc.
|
|
|
The Cincher Pocket |
|
Padded cover, 12" long with hook and loop
sides designed to wrap around "The Cincher" to avoid any
surface scratches. Primarily used where covers have cut outs
for towers, OB motors, and front nose clearances around
trailers. Match it to your boat cover. |
|
|
|
Strap
& Buckle Tie Downs |
|
|
Our unique Boat Cover Strap/Bucke Tie
Down System is a convenient way to secure your cover to your
boat. The system includes twelve (12) straps with buckles
and special adapters that attach to the loops already on
Westland’s Exact and Select Fit boat covers.
**Strap/Buckle Tie Down System is included with the Exact
Fit Boat Covers & Trailerable Select Fit Boat Covers**
|
|
|
Strap
& Buckle Pads |
|
|
Protect the sides of your boat from
damage caused by loose straps. Just slip straps through the
cut out areas in these Strap Pads to secure a soft non-woven
surface between the straps and fiberglass. Set of 12
strap pads. Available only in White.
|
|
|
Spare
Tire Covers |
|
Protect your spare tire and match it to
your boat cover. Sizes to fit standard 13", 14" and 15"
tires. Black Vinyl, Silver Grey Cloudburst, and various
colors in Sharkskin and Sunbrella®. |
|
|
|
Snap Ring
Tire Covers |
|
|
Tires take a lot of abuse and can become unsafe if left
exposed to the sun and
other environmental hazards too long. Now you can protect
your tires with ease
using our Snap-Ring TireSavers.
Our exclusive spring-steel ring design holds the TireSavers
in place and eliminates the
hassle of crawling around on the ground trying to secure
straps and hardware. Prices are per pair!
|
|
|
Pedestal
Boat Seat Covers |
|
Westland’s pedestal boat seat covers keep
seats dry and clean as well as protected from the sun to add
years to the life of the seat. |
|
|
|
Center
Console Covers |
|
Westland’s Center Console Covers keep
water, sun, and the elements from destroying your gauges,
controls and equipment. |
|
|
|
Digger
Anchors - Simply The Best Anchor |
|
|
Frustrated with your anchor? The
Digger Anchor will end your frustrations. Designed to
set without a chain and into almost any surface. A
built in releasing mechanism allows you to release the
anchor with ease when done. Available for boats up to
40 ft. long and for fresh or salt water.
| 10 lb. Anchor - For
boats up to 17 ft. |
| 12 lb. Anchor - For
boats up to 20 ft. |
| 15 lb. anchor - For
pontoons up to 30 ft. and boats up to 40 ft. |
|
|
|
|
Having Trouble?
- Call our customer
service department toll free at:
(888)
726-9300
- Monday through Wednesday
8:00 am - 4:00 pm / Pacific Standard Time
- or e-mail us
anytime at: thecoverfinder@coverquest.com
|
 |
Gray Only Qty:
.gif){kind=small}
