RV Cover Guide

MeasuringCarver RV on Class A

To ensure the best fit possible, it is necessary to measure your RV. Please see below for manufacturer-specific instructions for measurement.  

Measuring for a Carver CoverCarver Made in USA Logo

When choosing a Carver cover, measure from bumper to bumper. There is no need to include ladders or air conditioner units. These items will be taken into account and accommodated in the cover pattern. Hitches and propane tanks are items that are not typically covered.  Propane tank covers are available separately. We recommend completing your own measurements rather than relying on the specifications given by the RV manufacturer. Carver covers are made to fit the size listed. If your unit is any longer than what is listed, even by an inch, you should order the next larger size.

Measuring for an ADCO CoverADCO Logo

Measure your RV from bumper to bumper. PLEASE INCLUDE spare tire and ladders in your measurement. These items must be included in your overall length to insure a proper fit. Hitches and propane tanks are items that are not typically covered. Propane tank covers are available separately. We recommend completing your own measurements rather than relying on the RV manufacturer’s specifications. Adco covers are made to fit the size listed. If your unit is any longer than what is listed, even by an inch, you should order the next larger size.

Fit Options

Semi-CustomADCO Designer Series RV Cover on 5th Wheel Toy Hauler

Semi-Custom RV covers are made according to the style and size of each unit, offering a contoured fit and reliable protection. These covers feature elastic front and rear hems to hold the cover in place, as well as adjuster straps in the front to tighten the cover for a snug fit. ADCO covers also have grommets at the rear of the cover for cinching purposes. All RV covers include a storage bag and heavy duty hold-down straps with buckles. Depending on the style of the cover, some straps are attached and some come separately. Most RV covers feature zipper doors sewn along the side wall for easy access.

Many sizes are in stock. If your size is not in stock please allow 5-7 days for manufacturing.

Cover Features

Class A

Carver
  • 18’-26’: Two 108” zippers installed vertically along the passenger side wall.
  • 28’-48’: Three 108” zippers installed vertically along the passenger side wall.
  • Attached buckle and 12’ strap beside each zipper along the side wall.
  • Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
  • Included: Reinforcement kit to add extra protection in areas with sharp edges.
  • Included: Matching storage bag.
ADCO
  • Zipper entry panels along the side wall to access front and rear doors.
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Class B

Carver
  • Included: Four 33’ straps that pass over and under the unit with buckles for fastening
  • Included: Reinforcement kit to add extra protection in areas with sharp edges.
  • Included: Matching storage bag.
ADCO
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Class C

Carver
  • 18’-40’: Two 96” zippers installed vertically along the passenger side wall.
  • 42’-46’: Three 96” zippers installed vertically along the passenger side wall.
  • Attached buckle and 12’ strap beside each zipper along the side wall.
  • Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
  • Included: Reinforcement kit to add extra protection in areas with sharp edges.
  • Included: Matching storage bag.
ADCO
  • Zipper entry panels along the side wall to access front and rear doors.
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Fifth Wheel

Carver
  • 20’-30’:  Two 108” zippers installed vertically along the passenger side wall.
  • 32’-44’: Three 108” zippers installed vertically along the passenger side wall.
  • Attached buckle and 12’ strap beside each zipper along the side wall.
  • Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
  • Included: Reinforcement kit to add extra protection in areas with sharp edges.
  • Included: Matching storage bag.
ADCO
  • Zipper entry panels along the side wall to access front and rear doors.
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Fifth Wheel Toy Hauler

Carver
  • 20’-30’:  Two 108” zippers installed vertically along the passenger side wall.
  • 32’-44’: Three 108” zippers installed vertically along the passenger side wall.
  • Two 96” zippers for back door access.
  • Attached buckle and 12’ strap beside each zipper along the side wall.
  • Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
  • Included: Reinforcement kit to add extra protection in areas with sharp edges.
  • Included: Matching storage bag.
ADCO
  • Zipper entry panels along the side wall to access front and rear doors.
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Pop-up/Folding Tent Trailer

Carver
  • Included are two 33’ tie down straps with buckles that allow you to tighten them.
  • Included: Reinforcement kit to add extra protectionin areas with sharp edges
  • Matching storage bag.
ADCO
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Hi-Lo

ADCO
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included.

Travel Trailer Toy Hauler

Carver
  • 10’-22’: Two 96” zippers installed vertically along the passenger side wall.
  • 24’-40’: Three 96” zippers installed vertically along the passenger side wall.
  • Attached buckle and 12’ strap beside each zipper along the side wall.
  • Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
  • Included: Reinforcement kit to add extra protection in areas with sharp edges.
  • Included: Matching storage bag.

Travel Trailer

Carver
  • 10’-22’: Two 96” zippers installed vertically along the passenger side wall.
  • 24’-40’: Three 96” zippers installed vertically along the passenger side wall.
  • Attached buckle and 12’ strap beside each zipper along the side wall.
  • Included: Four 40’ straps that pass over and under the unit with buckles for fastening.
  • Included: Reinforcement kit to add extra protection in areas with sharp edges.
  • Included: Matching storage bag.
ADCO
  • Zipper entry panels along the side wall to access front and rear doors.
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Slide-in Truck Camper

ADCO
  • Zipper entry panels along the side wall to access front and rear doors.
  • Attached straps and buckles to hold the cover in place.
  • Reinforced corners reduce wear.
  • Vents to insure breathability and prevent billowing.
  • Storage bag included. 

Fabric Options

Carver 6 oz. Polyester

Made in the USA! This fabric is a true loom woven polyester, making it much harder to tear than traditional covers. Treated with a marine grade water repellency and state of the art UV and mildew inhibitors, this cover is sure to protect your RV from the elements. Constructed of 300 denier filament polyester yarns. Easy to handle and extremely strong.  Available in Silver Cloud and Desert Sand. 5 year warranty.

DuPont Tyvek® Designer Series

DuPont Tyvek offers protection against fierce weather climates and provides optimum protection against the sun’s harsh rays. High performance polypropylene sides insure maximum breathability and virtually eliminate mold and mildew.  Available in two-tone Tan.  2 year warranty.

SFS AquaShed Designer Series

Ideal for climates with intense moisture and moderate sun. High performance polypropylene sides insure maximum breathability and virtually eliminate mold and mildew. The triple layer SFS AquaShed top panel beads water on contact.  Available in two-tone Gray.  2 year warranty.

Installation

  1. Place the rolled cover on the front end of the roof.
  2. Roll the cover to the back end of the roof.
  3. Working from front to back, spread the cover to the side edges of the roof.
  4. From the ground, use a stepladder and work from front to back to pull the cover down over the sides of the RV.  Adjust the fit as necessary.
  5. Before securing the elasticized hems, you may wish to use the included reinforcement/repair kit to add protection to stress areas.
  6. Secure the elasticized hems under the front and rear end of the RV.
  7. Using the 40-foot tie down straps (if provided), secure the cover and adjust to create a snug fit. Most covers also have an adjustable strap system attached to the front of the unit to provide a more secure fit.
  8. Most covers have attached tie down straps at the bottom sidewalls of the cover.  Slide straps under the unit and connect on the opposite side.

See ADCO’s how to install your RV cover video for more info.

For more info on installing your RV cover, see the manufactures’ instructions.

Installing a Carver RV cover

Installing an ADCO RV cover

Care

How to Prolong the Life of Your RV Cover

  • Avoid letting water or snow stand on the RV cover.
  • Always tie cover down securely.
  • Before installing the cover, take the precaution of padding areas that could snag or tear; such as mirrors and awning mounts.
  • Allow RV cover to dry thoroughly before folding or storage.

RV covers may be cleaned by spraying with a hose and/or using a solution of mild soap and water, and a soft brush.  Rinse with hose and allow to dry completely.

See our PDF on How to prolong the life of your Carver RV cover.

Need help finding the right cover?
Talk with us.

Chat with an expert

or call 1-888-726-9300

Monday - Friday:
9am - 5pm est

The Cover Guide

Not sure what kind of cover you need?

Learn here

Shop for Less!

FREE SHIPPING

on all RV Covers!

It's never been a better time to protect your RV!

 

Testimonials

  • "Hi guys, this is Jimmy from Lindsey, Ontario. I received my boat cover for my bass boat and it fits like a dream. I am so impressed! Thanks everybody. Have a great summer!"
  • "I wanted to let you know that I received my bimini top on Friday, installed it on Saturday, and went boating with it on Sunday. The installation went smoothly and the top seems to be of very high quality. Thank you for helping me with my order! I'm pleased with your company and will surely consider you for any future boat cover purchases. Thanks again, Brian"