Installing Your RV Cover

classic rv cover.jpg

  1. Place the rolled cover on the front end of the roof. 
  2. Roll the cover to the back end of the roof.
  3. Working from front to back, spread the cover to the side edges of the roof.
  4. From the ground, use a stepladder and work from front to back to pull the cover down over the sides of the RV. Adjust the fit as necessary.
  5. Before securing the elasticized hems, you may wish to use the included reinforcement/repair kit to add protection to stress areas.
  6. Secure the elasticized hems under the front and rear end of the RV.
  7. Using the 40-foot tie down straps (if provided), secure the cover and adjust to create a snug fit. Most covers also have an adjustable strap system attached to the front of the unit to provide a more secure fit.
  8. Most covers have attached tie down straps at the bottom sidewalls of the cover. Slide straps under the unit and connect on the opposite side.
Next: Care and Cleaning Your RV Cover